View GBJ8005_4611266.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
GBJ8005 THRU GBJ810
FEATURES
* * * * *
VOLTAGE RANGE CURRENT
50 to 1000 Volts 8.0 Amperes
GBJ
O
19.7-20.3
Plastic package has UL Flammability Glassification 94V-0 Glass passivated chip junctions High case dielectric strength of 1500 VRMS High surge current capability High temperature soldering guaranteed 260/10 seconds, 0.375"(9.5mm) lead length
29.7-30.3 3.0x45
O
4.4-4.8 3.4-3.8
- 3 .4
.1 3
5.0
* * * * *
Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any (Note 3) Mounting Torque: 6 in - 1bs max. Weight: 0.26 ounce, 7.4 gram
3.8-4.2 17.0-18.0
MECHANICAL DATA
2.50.2 2.0-2.4
2.7-3.1
0.9-1.1 9.8-10.2 7.3-7.7 7.3-7.7
0.6-0.8
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
* * *
Ratings at 25 ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBJ SYMBOLS GBJ
8005 801
GBJ
802
GBJ
804
GBJ
806
GBJ
808
GBJ
810
Maximum Reverse Peak Repetitive Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At TC=100 (Note 1) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t8.3ms) Maximum Instantaneous Forward Voltage drop Per bridge element 4.0A TA=25 Maximum DC Reverse Current at rated DC blocking voltage per element TA=125 Typical Junction Capacitance, per let (Note 2) Typical Thermal Resistance (Note 4) Operating Junction Temperature Range Storage Temperature Range
VRRM VRMS VDC I(AV) IFSM I2 t VF IR CJ RJA TJ TSTG
50 35 50
100 70 100
200 140 200
400 280 400 8.0 170 166 1.0 5.0 500
600 420 600
800 560 800
1000 700 100
10.8-11.2
UNIT Volts Volts Volts Amps Amps A2s Volts
A
211.0 3.5 (-55 to +150) (-55 to +150)
94.0
pF /W
Notes: 1. Unit case mounted on 3.2x3.2x0.12" thick (8.2x8.2x0.3cm) A1. Plate heatdink
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat Transfer with #6 screws 4.Unit mounted in free air, no heat sink on P.C.B. 0.5x0.5"(12x12mm) copper pads 0.375" (9.5mm) lead length
E-mail: sales@cnmic.com
Web Site: www.cnmic.com
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
GBJ8005 THRU GBJ810
VOLTAGE RANGE CURRENT
50 to 1000Volts 8.0 Amperes
RATINGS AND CHARACTERISTIC CURVES GBJ8005 THRU GBJ810
FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT CURRENT (A)
10 250
FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG
TJ =150 8.3ms Single Half Sine-Wave (JEDEC Method)
60 Hz Resistive or Inductive Load
PEAK FORWARD SURGE, CURRENT,(A)
8.0
200
6.0
Heat-Sink Mounting,on 3.2x3.2x0.12"Thk (8.2x8.2x0.3cm)AL.Plate
150
4.0
100
2.0
50
0 0 20 50 80 100 120 150
0
1
10
100
CASE TEMPERATURE, FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER LGE
100 500 100
NUMBER OF CYCLES AT 60 Hz
FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER LEG
TJ =150
INSTANTANEOUS FORWARD CURRENT, (A)
10
INSTANTANEOUS REVERSE CURRENT, (A)
10
TJ =125
1
1
50-400V 600-1000V
0.1
TJ=25 Pulse width=300 S 1% Duty Cycle
0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.1
TJ =25
0.01
0
20
40
60
80
100
INSTANTANEOUS FORWARD VOLTAGE,(V) FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG
1000
PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG
100
TRANSIENT THERMAL IMPEDANCE (/W)
JUNCTION CAPACITANCE, (pF)
TJ=25 f=1.0MHz Vsig=50mVp-p
10
100
1
50-400V 600-1000V
10 0.1 1 10 100
0.1 0.01 0.1 1 10 100
REVRESE VOLTAGE,(V)
T, HEATING TIME (SEC.)
E-mail: sales@cnmic.com
Web Site: www.cnmic.com

▲Up To Search▲

Price & Availability of GBJ8005

	To Download GBJ8005 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .